{
  "meta": {
    "title": "Standard US fixture flow rates (GPM) used by the whole-house filter calculator",
    "updated": "2026-11-22",
    "note": "Faucet and showerhead values are US maximums from federal rules / EPA WaterSense. Tub, toilet-fill, dishwasher, clothes-washer and hose-bib values are common plumbing design assumptions, not federal limits; they are marked basis=assumed. Real flow is also limited by your supply line or pump."
  },
  "fixtures": [
    {
      "id": "kitchen_faucet", "label": "Kitchen faucet", "gpm": 2.2, "basis": "federal maximum",
      "defaultCount": 1,
      "source": "10 CFR 430.32 - federal max 2.2 GPM at 60 psi for faucets",
      "sourceUrl": "https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-430/subpart-C/section-430.32"
    },
    {
      "id": "bathroom_sink", "label": "Bathroom sink", "gpm": 1.5, "basis": "WaterSense maximum",
      "defaultFrom": "bathrooms",
      "source": "EPA WaterSense bathroom faucets - max 1.5 GPM",
      "sourceUrl": "https://www.epa.gov/watersense/bathroom-faucets"
    },
    {
      "id": "shower", "label": "Shower", "gpm": 2.5, "basis": "federal maximum",
      "defaultFrom": "bathrooms",
      "source": "10 CFR 430.32 - federal max 2.5 GPM at 80 psi for showerheads (WaterSense-labeled heads are 2.0 GPM or less)",
      "sourceUrl": "https://www.epa.gov/watersense/showerheads"
    },
    {
      "id": "bathtub", "label": "Bathtub filler", "gpm": 4.0, "basis": "assumed",
      "defaultCount": 0,
      "source": "Common plumbing design value for tub fill; verify against local code and your tub spout",
      "sourceUrl": "https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-430/subpart-C/section-430.32"
    },
    {
      "id": "toilet", "label": "Toilet (tank refill)", "gpm": 3.0, "basis": "assumed",
      "defaultFrom": "bathrooms",
      "source": "WaterSense toilets use 1.28 gallons per flush at most; refill rate of ~3 GPM is a common design assumption",
      "sourceUrl": "https://www.epa.gov/watersense/residential-toilets"
    },
    {
      "id": "dishwasher", "label": "Dishwasher", "gpm": 2.0, "basis": "assumed",
      "defaultCount": 1,
      "source": "Common plumbing design value for appliance fill",
      "sourceUrl": "https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-430/subpart-C/section-430.32"
    },
    {
      "id": "clothes_washer", "label": "Clothes washer", "gpm": 3.0, "basis": "assumed",
      "defaultCount": 1,
      "source": "Common plumbing design value for appliance fill",
      "sourceUrl": "https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-430/subpart-C/section-430.32"
    },
    {
      "id": "hose_bib", "label": "Outdoor hose bib", "gpm": 5.0, "basis": "assumed",
      "defaultCount": 0,
      "source": "Common plumbing design value for a 1/2 inch hose bib at typical pressure. Most homes bypass outdoor taps around the filter.",
      "sourceUrl": "https://www.ecfr.gov/current/title-10/chapter-II/subchapter-D/part-430/subpart-C/section-430.32"
    }
  ]
}
