Whole-house filter calculator

Add up your fixtures, name your concerns, and get a flow rate, a housing size and honest limits.

Size a whole-house filter

Water source
Sets the default number of sinks, showers and toilets below. Edit any of them.
Fixtures and appliances

Loading fixture flow rates…

What are you trying to address? (pick any) Lead and PFAS can only be confirmed by a lab test. Find a certified lab first.
Optional: Home Water Score inputs
Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.

How the filter sizer thinks

Filter types at a glance

TypeWhat it is forWhat to look forNot for
SedimentSand, silt, rust flakesNSF/ANSI 42 particulate class; 5 to 20 micronDissolved iron, hardness, chemicals
Carbon (block or GAC)Chlorine taste and odorNSF/ANSI 42; adequate contact time for your GPMHardness, most dissolved iron
KDF / carbon hybridOptional add-on with carbon for chlorineExact product's NSF listingReplacing an iron filter
Specialty (iron, lead, PFAS)Targeted problems confirmed by a labNSF/ANSI 53 or 58 listing that names the contaminantUntested guesses

Source: NSF: NSF/ANSI standards for drinking water treatment units (42, 44, 53, 58)

Required flow rate

GPM = Σ (count × flow rate per fixture)
FixtureGPMBasis
Kitchen faucet2.2federal maximum (source)
Bathroom sink1.5WaterSense maximum (source)
Shower2.5federal maximum (source)
Bathtub filler4assumed (source)
Toilet (tank refill)3assumed (source)
Dishwasher2assumed (source)
Clothes washer3assumed (source)
Outdoor hose bib5assumed (source)

What filters do not do

  • They do not soften water.
  • They only reduce what they are certified for.
  • Sediment and carbon cartridges are not disinfection devices.
  • They cannot tell you what is in your water: a lab test can.

Find a certified lab

Frequently asked questions

Why is flow rate (GPM) the first number to get right?

A filter rated below your peak demand drops water pressure when several fixtures run at once. Matching the housing to GPM keeps pressure steady.

Is a whole-house filter the same as a softener?

No. Sediment, carbon and KDF stages do not remove hardness minerals. Use the softener sizer for scale.

Will a whole-house filter handle lead or PFAS?

Those are lab-test questions. If a certified lab test finds them, look for NSF/ANSI certifications that name the specific contaminant, often at the drinking tap.

Should the outdoor hose bib be on the filter?

Most homes bypass outdoor taps because filtering lawn water wastes cartridge life. That is why the hose bib defaults to 0.

Sources