Whole-house filter calculator
Add up your fixtures, name your concerns, and get a flow rate, a housing size and honest limits.
Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.
How the filter sizer thinks
Filter types at a glance
| Type | What it is for | What to look for | Not for |
|---|---|---|---|
| Sediment | Sand, silt, rust flakes | NSF/ANSI 42 particulate class; 5 to 20 micron | Dissolved iron, hardness, chemicals |
| Carbon (block or GAC) | Chlorine taste and odor | NSF/ANSI 42; adequate contact time for your GPM | Hardness, most dissolved iron |
| KDF / carbon hybrid | Optional add-on with carbon for chlorine | Exact product's NSF listing | Replacing an iron filter |
| Specialty (iron, lead, PFAS) | Targeted problems confirmed by a lab | NSF/ANSI 53 or 58 listing that names the contaminant | Untested guesses |
Source: NSF: NSF/ANSI standards for drinking water treatment units (42, 44, 53, 58)
Required flow rate
GPM = Σ (count × flow rate per fixture)
What filters do not do
- They do not soften water.
- They only reduce what they are certified for.
- Sediment and carbon cartridges are not disinfection devices.
- They cannot tell you what is in your water: a lab test can.
Frequently asked questions
Why is flow rate (GPM) the first number to get right?
A filter rated below your peak demand drops water pressure when several fixtures run at once. Matching the housing to GPM keeps pressure steady.
Is a whole-house filter the same as a softener?
No. Sediment, carbon and KDF stages do not remove hardness minerals. Use the softener sizer for scale.
Will a whole-house filter handle lead or PFAS?
Those are lab-test questions. If a certified lab test finds them, look for NSF/ANSI certifications that name the specific contaminant, often at the drinking tap.
Should the outdoor hose bib be on the filter?
Most homes bypass outdoor taps because filtering lawn water wastes cartridge life. That is why the hose bib defaults to 0.
Sources
- eCFR 10 CFR 430.32: federal flow limits for faucets and showerheads
- EPA WaterSense: Bathroom faucets
- EPA WaterSense: Showerheads
- EPA WaterSense: Toilets
- NSF: NSF/ANSI standards for drinking water treatment units (42, 44, 53, 58)
- EPA: Basic Information about Lead in Drinking Water
- EPA: PFAS (per- and polyfluoroalkyl substances)
- EPA: Certified drinking-water laboratories (by state)