Whole-house filter GPM calculator

Add up your fixtures to get the flow rate your filter must handle, then match the housing.

Size a whole-house filter

Water source
Sets the default number of sinks, showers and toilets below. Edit any of them.
Fixtures and appliances

Loading fixture flow rates…

What are you trying to address? (pick any) Lead and PFAS can only be confirmed by a lab test. Find a certified lab first.
Optional: Home Water Score inputs
Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.

The guide

Flow first, media second

A whole-house filter sits on the main line, so it sees your total demand. If the filter's rated flow is lower than your peak, pressure drops when a shower, washer and sink run together. GPM is the first number to match.

Source: eCFR 10 CFR 430.32: federal flow limits for faucets and showerheads

Standard US values used

Matching housing to flow

Peak GPMTypical housing
up to 104.5" x 10" big-body housing
10 to 154.5" x 20" big-body housing
15 to 20Two 4.5" x 20" housings in parallel, or a 1.5 cu ft media tank
over 20Tank-style system sized by a licensed installer

Typical manufacturer rating ranges; always check the rated service flow at your pressure.

Frequently asked questions

How many GPM does a typical house need?

Adding every fixture running at once, a two-bathroom home with a washer and dishwasher comes to about 21 GPM. Real homes rarely run everything at once and are capped by their supply line or pump.

What happens if the filter is rated too low?

You get pressure drop at the taps, faster cartridge wear, and in carbon media less contact time. Size to your real peak flow.

Where do the flow rates come from?

Faucets and showerheads use federal maximums and EPA WaterSense values; appliance and tub values are common design assumptions labeled as such in the table.

Does the filter fix hard water?

No; use the softener sizer for hardness.

Sources