How hard is my water?

Four ways to find your hardness number, plus a starter table for major US metro areas.

Find hardness for your area

ZIP-level pages are coming in phase 2. For now this explains how to get your exact number.

Loading table…

All values are approximate (source: USGS). Hardness varies by neighborhood and season.

Test your water

The table gives you a starting point. For a number you can size equipment on, get your utility's annual report or a lab test.

Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.

The guide

Find your hardness number

  1. Utility report (best free option). Search your water utility's Consumer Confidence Report for "hardness" or "calcium carbonate". Source: EPA: Consumer Confidence Reports (annual utility water-quality report)
  2. Call the utility. They can usually give you a typical figure for your service area.
  3. Test strips. Fast and cheap, rough category only.
  4. Certified lab. The right choice for private wells and for any purchase decision. Source: EPA: Certified drinking-water laboratories (by state)

gpg, mg/L and ppm

Hardness is reported as grains per gallon (gpg) or milligrams per liter (mg/L, equal to ppm) as calcium carbonate. 1 gpg = 17.1 mg/L.

Hardness (gpg)Categorymg/L (approx.)
Under 1Softunder 17
1 to 3.5Slightly hard17 to 60
3.5 to 7Moderately hard60 to 120
7 to 10.5Hard120 to 180
Over 10.5Very hardover 180

This is the grains-per-gallon scale commonly used in the water-treatment industry. USGS publishes a similar scale in mg/L with slightly different category names; both describe the same calcium and magnesium minerals. Source: USGS Water Science School: Hardness of Water

ZIP codes are not water systems

One ZIP can be served by more than one utility, and one utility can blend several sources, so hardness can change between neighborhoods and seasons. That is why the table above is labeled approximate and why phase 2 will add ZIP pages that point to the right utility report rather than guess.

Frequently asked questions

Is there a single database of hardness by ZIP code?

Not an official one. Water systems and ZIP codes do not line up, so the reliable source is your utility's annual Consumer Confidence Report. ZIP-level pages are planned for phase 2 of this site.

Are test strips accurate?

They give a rough category. For sizing, use a utility report or lab result.

I have a private well. Can I look it up?

No; wells differ house to house. You need your own lab test.

How do I convert mg/L to gpg?

Divide mg/L (as calcium carbonate) by 17.1. 171 mg/L is 10 gpg.

Sources