Water softener grains per day

The one number behind softener size, regeneration and salt: how to calculate it and what it means.

  1. 1Household
  2. 2Your water
  3. 3Your result

Who uses the water?

Count everyone who lives in the home most of the time.
Advanced: daily water use and salt price
Default 75. EPA WaterSense reports the average American uses roughly 82 gallons a day at home; lower it for a frugal household.
An editable assumption used only for the annual cost estimate.
Fill in the fields for an instant estimate.
Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.

The guide

One number runs everything

Grains per day is the daily hardness load on your softener. It sets how big a unit you need, how often it regenerates and how much salt it uses. Once you know it, every other number follows.

grains per day = (hardness gpg + 3 x iron ppm) x gallons per day

Source: USGS Water Science School: Hardness of Water

Three households

HouseholdCompensated hardnessGallons / dayGrains / dayNeeds (7 days)Size
2 people, 8 gpg8 gpg1501,2008,40024,000
4 people, 12 gpg, 1 ppm iron15 gpg3004,50031,50032,000
5 people, 20 gpg20 gpg3757,50052,50064,000

75 gallons per person per day, 7-day regeneration target.

From grains per day to days and bags

regeneration interval = unit capacity ÷ grains per day
salt per year = grains per day x 365 ÷ 3,350 grains per lb
bags per year = salt per year ÷ 40 lb, rounded up

3,350 grains per pound is the efficiency minimum for NSF/ANSI 44 efficiency-rated softeners, a sensible planning value; your unit's rating may be higher. Source: NSF/ANSI 44: Residential cation exchange water softeners (NSF)

Why iron adds to the load

Dissolved iron competes for the same resin sites as hardness minerals. Sizing practice treats each 1 ppm as 3 gpg of extra hardness. Above about 2 ppm, remove iron before the softener; see the well-water planner.

Source: EPA: Secondary Drinking Water Standards (iron, manganese, pH, odor)

Frequently asked questions

What does "grains per day" mean?

It is how many grains of hardness your household sends through the softener each day. One grain is 1/7,000 of a pound; hardness in gpg is grains per gallon.

How do I get grains per day?

Multiply compensated hardness (gpg, plus 3 per ppm of iron) by gallons used per day.

What is a typical value?

A 3-person home with 10 gpg hardness uses about 2,250 grains per day (3 x 75 x 10). Your numbers will differ.

How does it connect to salt?

Salt use tracks grains removed. At the NSF/ANSI 44 efficiency minimum of 3,350 grains per pound, 2,250 grains per day is about 245 lb of salt a year.

Sources