Size your home water treatment with math, not a sales pitch.

Which water softener, whole-house filter or well-water system does your home need, and what will it cost to run? Enter a few numbers, see the math, get a size.

Start with the softener sizer

Don't know your hardness? Look it up by metro area.

Why it is different

  • Brand-agnostic. Math first. Product categories come after, as specs.
  • Sourced. Every recommendation links to USGS, EPA or NSF/ANSI.
  • Private. Runs in your browser. No signup, nothing collected.
  • Honest. We tell you what each option does not do, and when to test your water first.

Three steps, instant answer

Step 1

Your household

How many people live there, and (optionally) how much water they use. The default is 75 gallons per person per day.

Step 2

Your water

Hardness in grains per gallon, plus iron if you have it. A built-in scale shows whether your water is soft or very hard.

Step 3

Your result

Recommended size, grains per day, regeneration interval, salt per year and cost, a plain-English explanation, and a printable summary.

All the tools

How the math works

Tap a topic. Every formula is shown, every input is yours, and each number links to its source.

Softener sizing

compensated hardness = hardness (gpg) + 3 × iron (ppm)
grains per day = compensated hardness × gallons per day
capacity needed = grains per day × 7 days → next standard size (24k / 32k / 48k / 64k)
regeneration interval = size ÷ grains per day
salt per year = grains per day × 365 ÷ 3,350 grains per lb

The 3,350 grains-per-pound figure is the minimum efficiency an NSF/ANSI 44 efficiency-rated softener must reach, so it is a fair planning value. The 3-gpg-per-ppm iron compensation is standard sizing practice. Source: NSF/ANSI 44: Residential cation exchange water softeners (NSF)

Whole-house filter sizing

required GPM = sum of (number of fixtures × flow rate per fixture)

Flow rates come from federal limits and EPA WaterSense (faucets 2.2 or 1.5 GPM, showers 2.5 GPM) plus common design values for tubs, toilets and appliances, each labeled with its basis in data/fixtures.json. Filter types follow your stated concerns and the relevant NSF/ANSI standard. Source: eCFR 10 CFR 430.32: federal flow limits for faucets and showerheads

Well-water treatment order

The planner applies a fixed order: neutralize low pH (below 7.0) first, oxidize and filter iron, manganese and sulfur, polish with carbon where an oxidant was used, and soften last. Thresholds use the EPA secondary guidelines (iron 0.3 ppm, manganese 0.05 ppm, pH 6.5 to 8.5). Source: EPA: Secondary Drinking Water Standards (iron, manganese, pH, odor)

Home Water Score (0 to 100)

score = 100 − hardness penalty (0 to 40) − iron penalty (0 to 35) − pH penalty (0 to 25)
hardness penalty = 40 × (gpg − 1) ÷ 14, between 0 and 40
iron penalty = 35 × ppm ÷ 3, capped at 35
pH penalty = 12.5 per pH unit outside 6.5 to 8.5, capped at 25

80 to 100: Good. 50 to 79: Treatable. Below 50: Test and treat. It is a planning score for how much treatment your numbers suggest, not a measure of whether water is safe to drink. Source: EPA: Secondary Drinking Water Standards (iron, manganese, pH, odor)

Where numbers come from

Our rules

  • No brand pushing. Product suggestions are spec-based categories shown after the math.
  • No health claims. Questions about contaminants go to a certified lab.
  • No data collection. Calculators run in your browser; there are no forms that send data anywhere.
  • No signups, no payments, no accounts. See privacy and affiliate disclosure.

Read the guides

Planning estimates only. Verify your numbers with a certified lab test, and have any installation done by a licensed plumber. Results are estimates, not engineering, plumbing, medical, or legal advice, and no health claims are made. See the terms.